Product ID:METLBOND 1117
MSDS Date:07/06/1988
FSC:8040
NIIN:00N042069
MSDS Number: BSTBJ

BASF STRUCTURAL MATERIALS INC

1440 N KRAEMER BLVD
ANAHEIM, CA 92806
US

Emergency Phone: 714-630-9400

Info Phone: 714-666-4309

Cage: 1HT75

NARMCO MATERIALS INC SUB OF CELANESE CORP

ANAHEIM, CA 92806-1404 US

Telephone: 803-329-8051

Cage: 04622

POLYESTER (MAT)

Fraction By Weight: 5%

EPOXY RESINS (WITH AMINE HARDENERS)

Fraction By Weight: 87%

BUTADIENE/ACYRLONITRILE RUBBER

Fraction By Weight: 6%

INERT FILLER

Fraction By Weight: 20%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGESTION: LOW TOXICITY IS
EXPECTED. HOWEVER, NO SPECIFIC INFORMATION EXISTS ON PRODUCT.
INHALATION: LOW TOXICITY IS EXPECTED. HOWEVER, NO SPECIFIC
INFORMATION EXISTS ON PRODUCT. SKIN: PRODUCT CONTAINS MATERIALS
(EPOXY RESINS) WHICHMAY CAUSE SKIN IRRITATION AND/OR SENSITIZATION
AFTER REPEATED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: CONTACT. REPEATED SKIN CONTACT
MAY CAUSE ALLERGIC CONTACT DERMATITIS IN SENSITIVE INDIVIDUALS.
EYE: MAY CAUSE IRRITATION. CHRONIC: NO ADVERSE EFFECTS HAVE BEEN
REPORTED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: FLUSH W/COPIOUS AMTS OF WATER FOR AT LST 15 MINS. SEEK
MED ATTN IF SYMPS PERSIST. SKIN: WASH WITH COPIOUS AMTS OF SOAP &
WATER. WASH CONTAMD CLTHG BEFORE WEARING. SEEK MED ATTN IF
IRRIT/REDDENING OF SKIN DEVELOPS. INGEST: IF SIGNIFICANT QTY HAS
BEEN SWALLOWED, GIVE 2 GLASSES OF WATER & INDUCE VOMIT. SEEK
MEDICAL ATTN. INHAL: REMOVE TO FRESH AIR. SEEK MEDICAL ATTN IF
SYMPTOMS PERSIST.

Flash Point:450F,232C
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, FOAM OR CARBON
DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE EXPECTED.

Spill Release Procedures:PLACE INTO DISPOSAL CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AT 0F.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:A NIOSH/MSHA APPROVED RESPIRATOR FOR DUSTS IS
RECOMMENDED IF THERE IS POSSIBILITY OF FIBER DUST EXPOSURE.
Ventilation:LOCAL EXHAUST: WHEN APPROP TO CNTRL EMPLOYEE EXPOS.
MECHANICAL (GENERAL): NOT AS SOLE MEANS OF CONTROLLING EXPOSURE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:LONG-SLEEVED CLOTHING IS RECOMMENDED TO
MINIMIZE SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Spec Gravity:>1 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:RESIN IMPREGNATED POLYESTER MAT.
Percent Volatiles by Volume:<0.5

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS, ALKALIS, AMINES, MERCAPTANS.
Stability Condition to Avoid:HEAT; AVOID STORAGE AT TEMPERATURES ABOVE
100F.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:HEAT; STRONG OXIDIZING AGENTS,
ACIDS, ALKALIS, AMINES, AND MERCAPTANS.

Waste Disposal Methods:INCINERATE OR BURY IN LANDFILL IN ACCORDANCE
WITH FEDERAL, STATE AND LOCAL REGULATIONS. THIS PRODUCT, AS
SHIPPED, IS NOT RCRA HAZARDOUS WASTE UNDER PRESENT EPA REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.